Call Us:
0208 748 1039
HomeProducts Base Station Receivers
SR2 Base Station

The sr2 is the second generation of the Hanwell Smart Receiver. It is a network enabled receiver, designed for collecting environmental monitoring data from multiple points within a site, or across multiple sites. In addition, it can be upgraded to a transceiver which both receives and retransmits the data. It uses standard TCP/IP communications protocols for speedy data handling. The network traffic generated is very low and data is automatically sorted and filed.

·         Transmitter platforms supported rl2000, rl4000, rl5000 and rl8000 ranges.  The sr2 unit can also read hard-wired sensors and, optionally, be fitted with up to eight on-board probes

·         Each sr2 handles data from up to 253 sensors, and up to 16 sr2s can be run on a single system bringing it to a total of 4048 sensors

·         The sr2 logs all received data in its on-board 512kb memory. The Radiolog software continually interrogates the sr2 for the most recent data, and downloads the data according to user-defined logging periods to the server or operating PC.

·         Software users can view live and historic data, produce out of spec and summary reports and set alarms on both the data levels and the rate of change.

·         In the event of network or power failure, an on-board battery provides a UPS with 2.3A/hour life to carry it through up to 12 hours’ power disruption (larger external UPSs are available as an optional extra).

·         Alarm relays are included: these can indicate that the readings are out of specification, and can be optionally set to indicate a network failure. A MS BUS connection allows the sr2 radio receiver to drive the Hanwell ms1000 environmental control system (Also see Alarm Options).